拉萨附近有没有服务

Welcome to Jiangsu meiante instrument factory

 Radar level gauge

National hotline 0517-86951208

Liquid level transmitter

 Hydrostatic high temperature input liquid level transmitter

Hydrostatic high temperature input liquid level transmitter

  • Jiangsu meiante instrument professional production bp500 high temperature input liquid level transmitter, solid structure, no moving parts, high reliability, long service life, welcome to inquire about the price
Product details

Ate-bp500 series hydrostatic high temperature input liquid level transmitter is based on the principle that the measured liquid static pressure is directly proportional to the height of the liquid, and uses the piezoresistive effect of diffusion silicon or ceramic sensor to convert the static pressure into electrical signal. After temperature compensation and linearity correction. It is converted into 4 ~ 20mADC standard current signal output.
The sensor part of ate-bp500 series static pressure high temperature input type liquid level transmitter can be directly put into the liquid, and the transmitter part can be fixed by flange or bracket, which is very convenient to install and use, and can overcome the working condition of only working in low temperature environment.

Technical parameters of high temperature input liquid level transmitter
Measurement range: 0.3 ~ 100m (selected by users)
Accuracy: 0.2, 0.5, 1.0
Working temperature: - 20 ℃ ~ 200 ℃
Output signal: 2-wire 4 ~ 20mADC
Power supply voltage: 36VDC
0% FS
Load capacity: 0 ~ 600 Ω
Relative temperature: ≤ 85%
Protection grade: IP68
Explosion proof sign: Exia II ct4-6
?

?

Introduction of type selection of high temperature liquid level transmitter
Type spectrum explain
ATE500P ? Input static pressure high temperature liquid level transmitter
Isomorphism two ? Rod type (the sensor is installed at the bottom and directly contacts the liquid medium)
three ? Anticorrosive
four ? Pressure guide rod type (the sensor is installed on the upper part and does not directly contact the medium)
Process connection form T ? Bracket installation
N ? Dn40.0 flange installation
Y ? Special agreement
Sensor connection material one ? three hundred and four Pole type
two ? three hundred and sixteen
three ? 316L
four ? Compound of NBR and PVC Cable type
five ? PTFE, (polypropylene flange)
Explosion proof method O ? Non explosion proof
E ? Intrinsically safe ex ia II CT6
Display mode O ? Without site instructions
Z ? With ammeter indication (0-100% scale)
X ? With LCD digital display
Counterweight O ? No counterweight is required
W ? Counterweight is required
? -□ ? Installation height (mm)
? -□ ? Measurement height (mm)
? -□ ? Density of measured medium (g / cm3)

?

?
General features of high temperature input liquid level transmitter
Good stability, high precision, can work in high temperature environment
It is easy to install and use when it is directly put into the measured medium
Solid structure, no moving parts, high reliability, long service life, from water, oil to paste with high viscosity
High precision measurement, not affected by bubbling, deposition and electrical characteristics of the measured medium, wide range of temperature compensation
This information link address: http://tealattewithstyle.com/product/yeweibsq/50.html
label:
 Hydrostatic high temperature input liquid level transmitter

Take the QR code and read the information with you

Try scanning with your mobile phone,
Continue to view this page on your phone.