拉萨附近有没有服务

Welcome to Jiangsu meiante instrument factory

 Radar level gauge

National hotline 0517-86951208

Quartz tube level gauge

 X49h plate boiler water level gauge

X49h plate boiler water level gauge

  • Jiangsu meiante instrument professional production of x49h flat water level gauge (also known as liquid level indicator), it is suitable for industrial steam boiler and steam locomotive boiler and reservoir as indicator fluid, water level, welcome to inquire about the price
Product details

Application of x49h flat plate boiler water level gauge:

The flat water level gauge (also known as liquid level indicator) is suitable for indicating liquid and water level on industrial steam boiler, steam locomotive boiler and accumulator.

?

? Common faults and treatment methods:
Common fault location
Cause of failure
processing method
Leakage of valve connection
Poor connection between valve and main body seal
Screw the nut or seal the graphite ring
The graphite bushing of the cock is worn
Tighten the nut and replace it with a new bushing without any effect
Main sealing surface leakage
The sealing gasket is broken or there are impurities on the sealing surface
Remove the foreign matters and replace the new pressure pad
Fasteners not tightened
Moderate tightening
Display color code
The light is not clear
Due to fouling, drain the water several times immediately or close the steam water valve for brushing several times
According to the installation of prism (or glass plate), the pressure should be uniform, and the screw thread should be tightened in several times (see the figure below) to achieve the torque 20-39.4Nm until.
?

?

 Structural schematic diagram of plate water level gauge for x49h boiler Structural schematic diagram of plate water level gauge for x49h boiler

Main technical parameters:

model
X49H?DN25 mm
Nominal pressure
1.6MPa
2.5 MPa
4.0 MPa
Test pressure
2.45 MPa
3.8 MPa
6.0 MPa
Time Baoli
3Min
3Min
3Min
Medium temperature
t≤205
t≤225
t≤250
Installation center distance
three hundred three hundred and fifty four hundred and forty mm
Screen height
165~195 mm
Observation distance
15m
Medium temperature
t≤250

?

Use and maintenance:

1. When the water level gauge is used, it should be preheated for 20-30 minutes. After the glass plate has a certain temperature, the valves at both ends can be opened to feed water or other media.

2. In the process of use, it is required to discharge water frequently to avoid blockage of channel and false water level.

3. When replacing the glass plate, the sundries and iron chips on the sealing surface should be removed.

Boiler water level gauge / boiler plate water level gauge / x49h-25 / x49h-40
?

This information link address: http://tealattewithstyle.com/product/shipping/41.html
label:
 X49h plate boiler water level gauge

Take the QR code and read the information with you

Try scanning with your mobile phone,
Continue to view this page on your phone.