Our company's electric heat tracing magnetic flap level gauge and thermal insulation type magnetic flap liquid level meter are installed with electric mixing heat source and asbestos insulation layer outside the main body of the basic type, which can keep the temperature of the liquid in the main body about 75 ℃ so as to make the liquid flow normally. The outside is made of 304 stainless steel plate and has a beautiful appearance. Electric heating magnetic flap level meter is suitable for liquid solidifying in low temperature environment
Electric heat tracing Electric heating Main parameters of magnetic level gauge
Measurement range: 500 ~ 8000mm
Accuracy: ± 10 mm (thermal insulation type)
Working pressure: ≤ 2.5MPa (common type)
≤ 10.0MPa (high pressure type)
≤ 2.5MPa (anticorrosive type)
Ambient temperature - 40 ℃ - 50 ℃
Medium density of insulation type magnetic flap level gauge: 0.45 ~ 2G / cm3
● medium density difference: ≥ 0.15g/cm3 (measuring limit)
Medium temperature: - 80 ℃ ~ + 450 ℃
Power: 25 W / m, 35 W / m, higher maintenance temperature: 65 ℃
When the viscosity of medium is less than or equal to 0.4 s, the medium can be heated according to the user's requirements.
Environmental vibration: frequency ≤ 25Hz, amplitude ≤ 0.5mm
Interface flange: adopt hg20592 ~ 20635-97 flange standard newly issued by Ministry of chemical industry in 1997.
If users need to adopt other standards (such as GB, ANSI, DIN and other standards), they can be designed according to their needs.