拉萨附近有没有服务

Integrated ultrasonic liquid level meter (two, three, four wire system)

Product introduction

This series of products adopt two-wire system technology. Power supply and signal output share one two core cable, and output 4-20mA current signal.

? ??

Technical specification of ultrasonic level gauge
Range: mat4: 4.00m (liquid)
Mat 6: 6.00m (liquid)
Mat 8: 8.00m (liquid)
Mat 10: 10.00m (liquid)
Mat 15: 15.00m (liquid) 6.00m (solid)

Mat 20: 20.00m (liquid) 10.00m (solid)
Mat 30: 30.00m (liquid) 15.00m (solid)
Blind area: mat 4: 0.20m
???????????????? MAT 6:0.25m
MAT 8:0.30m
MAT 10:0.40m
MAT 15: 0.80m
???????????????? MAT 20: 1.20m
???????????????? MAT 30: 1.60m
?
Accuracy (in air): range 0.2%
Current output: 4 ~ 20mA
Output resolution: 0.03% of actual range
Output load: 0 ~ 500 Ω
Display resolution: 1 mm / 1 cm
Display mode: 4-bit LCD (character height 15cm)
Input power supply: dc20 ~ 32V
Temperature compensation: full range automatic
Medium temperature: - 45 ℃~ + 85 ℃
Pressure range: ± 0.1mp
Acoustic beam angle: 8 ° (3dB)
Detection period: 1 second
Parameter setting: 3-digit sensitive key
Cable installation: pg13.5 gland
Shell material: ABS
Sensor material: PVC
Protection grade: IP67
Installation method: thread (flange) or fixing hole (bracket)
Vessel flange: small inner diameter is Φ 65mm, no other requirements
Application site: storage tank, chemical tank, pool, material tank, channel, water well, etc
Tested medium: clear water, sewage, mortar, mud, acid-base liquid, chemical reagent, lubricating oil, heavy oil asphalt
?

Characteristics of integrated ultrasonic liquid level meter
It can be up to 30 m in large range
Low resolution 1 mm
Large LCD display
Intelligent signal processing technology
All plastic anti-corrosion shell
Patented transducer structure
Simple key setting parameters
Flexible installation mode
The probe can be lengthened
Protection grade IP67
There is no need to wait for the container to empty or fill up, and no additional remote control is required
Thread (flange) fixing hole (bracket)
It is suitable for outdoor closed container installation in cold area to prevent frosting

 Integrated ultrasonic liquid level meter (two, three, four wire system)

????

Technical specification of ultrasonic level gauge
Range: mat4: 4.00m (liquid)
Mat 6: 6.00m (liquid)
Mat 8: 8.00m (liquid)
Mat 10: 10.00m (liquid)
Mat 15: 15.00m (liquid) 6.00m (solid)

Mat 20: 20.00m (liquid) 10.00m (solid)
Mat 30: 30.00m (liquid) 15.00m (solid)
Blind area: mat 4: 0.20m
???????????????? MAT 6:0.25m
MAT 8:0.30m
MAT 10:0.40m
MAT 15: 0.80m
???????????????? MAT 20: 1.20m
???????????????? MAT 30: 1.60m
?
Accuracy (in air): range 0.2%
Current output: 4 ~ 20mA
Output resolution: 0.03% of actual range
Output load: 0 ~ 500 Ω
Display resolution: 1 mm / 1 cm
Display mode: 4-bit LCD (character height 15cm)
Input power: dc20 ~ 32V
Temperature compensation: full range automatic
Medium temperature: - 45 ℃~ + 85 ℃
Pressure range: ± 0.1mp
Acoustic beam angle: 8 ° (3dB)
Detection period: 1 second
Parameter setting: 3-digit sensitive key
Cable installation: pg13.5 gland
Shell material: ABS
Sensor material: PVC
Protection grade: IP67
Installation method: thread (flange) or fixing hole (bracket)
Vessel flange: minimum inner diameter is Φ 65mm, no other requirements
Application site: storage tank, chemical tank, pool, material tank, channel, water well, etc
Tested medium: clear water, sewage, mortar, mud, acid-base liquid, chemical reagent, lubricating oil, heavy oil asphalt
?