拉萨附近有没有服务

Split type ultrasonic liquid level gauge (simplified type)

Product introduction

Mat-616f split type ultrasonic liquid level gauge (simplified type)
Description of ultrasonic level gauge
This series of products adopt two-wire system technology. Power supply and signal output share one two core cable, and output 4-20mA current signal

Technical specification of split type ultrasonic level meter
Range: mat4: 4.00m (liquid)
Mat 6: 6.00m (liquid)
Mat 8: 8.00m (liquid)
00 m (mat: 10.00 m)
Blind area: mat4: 0.20m
????????????????? MAT 6:0.25m
?????????????? MAT 8A:0.30m
????????????????? MAT 10:0.40m
Accuracy (in air): range 0.2%
Current output: 4 ~ 20mA
Output resolution: 0.03% of actual range
Output load: 0 ~ 500 Ω
Display resolution: 1 mm / 1 cm
Display mode: 4-bit LCD (character height 15cm)
Input power: dc20 ~ 32V
Temperature compensation: full range automatic
Medium temperature: - 45 ℃~ + 85 ℃
Pressure range: ± 0.1mp
Range: 3dB (8 °)
Detection period: 1 second
Parameter setting: 3-digit sensitive key
Cable installation: pg13.5 gland
Shell material: ABS
Sensor material: PVC
Protection grade: IP67
Or (flange) mounting method
Vessel flange: small inner diameter is Φ 65mm, no other requirements
Application of ultrasonic level gauge
Application site: storage tank, chemical tank, pool, material tank, channel, water well, etc
Tested medium: clear water, sewage, mortar, mud, acid-base liquid, chemical reagent, lubricating oil, heavy oil asphalt

Product characteristics of split type ultrasonic level meter
It can be up to 30 m in large range
Low resolution 1 mm
Large LCD display
Intelligent signal processing technology
All plastic anti-corrosion shell
Patented transducer structure
Simple key setting parameters
Flexible installation mode
The probe can be lengthened
Protection grade IP67
There is no need to wait for the container to empty or fill up, and no additional remote control is required
Thread (flange) fixing hole (bracket)
It is suitable for outdoor closed container installation in cold area to prevent frosting.

 Split type ultrasonic liquid level gauge (simplified type)

Product characteristics of split type ultrasonic level meter
The maximum range is up to 30m
Minimum resolution 1 mm
Large LCD display
Intelligent signal processing technology
All plastic anti-corrosion shell
Patented transducer structure
Simple key setting parameters
Flexible installation mode
The probe can be lengthened
Protection grade IP67
There is no need to wait for the container to empty or fill up, and no additional remote control is required
Thread (flange) fixing hole (bracket)
It is suitable for outdoor closed container installation in cold area to prevent frosting.